You can skip this in seconds

Click here to continue

Download Now!

ECS A880GM-M7 (V2.0) ATI VGA Driver 8.631 for XP

ECS A880GM-M7 (V2.0) ATI VGA Driver 8.631 for XP

ECS A880GM-M7 (V2.0) ATI VGA Driver 8.631 Publisher's Description

CPU
- Socket AM3 socket for AMD Phenom II processors
- Support 95W Phenom II X6 processors
- High-performance HyperTransport 3.0 CPU Interface
- Note: This board supports CPU up to 95W TDP only; you can refer to AMD website to check your CPU.

CHIPSET
- AMD 880G & AMD SB710
- North Bridge: AMD 880G
- South Bridge: AMD SB710

GRAPHICS
- On Chip(AMD 880G-based with ATI Radeon HD4250 graphics )
- Share Memory: Maximum up to 512MB
- Integrated DirectX10.1 graphics processor

MEMORY
- Dual-channel DDR3 memory architecture
- 2 x 240-pin DDR3 DIMM socket support up to 16 GB*
- Support DDR3 up to 1600(OC)/1333/1066 DDR3 SDRAM
- *(Due to the DRAM maximum size is 4GB at present, the memory maximum size we have tested is 8GB)
- *(Due to AMD CPU spec limitation, please refer to Memory QVL for more information)

EXPANSION SLOT
- 1 x PCI Express x16 Gen2.0 slot
- 1 x PCI Express x1 slot
- 2 x PCI slots

STORAGE
- Support by AMD SB710
- 2 x Ultra DMA133/100/66 devices
- 6 x Serial ATAII 3.0Gb/s devices
- RAID0, RAID1, RAID10 configuration

AUDIO
- VIA VT1705 6-channel audio CODEC
- Compliant with HD audio specification

REAR PANEL I/O
- 1 x PS/2 keyboard & PS/2 mouse connectors
- 1 x D-sub(VGA)
- 1 x DVI connector
- 1 x Serial port (COM1)
- 1 x RJ45 LAN connector
- 1 x Audio port (Line-in, Line-out, Mic-in)
- 4 x USB 2.0 Ports

INTERNAL I/O CONNECTORS & HEADERS
- 1 x 24-pin ATX Power Supply connector
- 1 x 4-pin 12V Connector
- 1 x 4pin CPU_FAN connectors
- 1 x 3-pin SYS_FAN connector
- 1 x IDE connector
- 1 x Speaker header
- 1 x Front panel switch/LED header
- 1 x Front panel audio header
- 1 x SPDIF out header
- 1 x Clear CMOS header
- 1x CD in header
- 6 x Serial ATA 3Gb/s connectors
- 3 x USB 2.0 headers support additional 6 USB ports

SYSTEM BIOS
- AMI BIOS with 8Mb SPI Flash ROM
- Supports Plug and Play, STR (S3) / STD (S4) , Hardware monitor, Multi Boot
- Audio, LAN, can be disabled in BIOS
- F11 hot key for boot up devices option
- Support over-clocking
- Support eJIFFY

FORM FACTOR
- Micro-ATX Size, 244mm*210mm


It is highly recommended to always use the most recent driver version available.

Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.

Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.

Look for Similar Items by Category

Feedback

Popular Downloads